How to get the most out of your TriPollar Stop X device

This post is for you if you already own our flagship device, TriPollar Stop X, or are thinking about buying it.

Congratulations! TriPollar Stop X is a fantastic device, a world leader in home radiofrequency technology thanks to its proven effectiveness, which is based on two main factors:

• It is a multi-radiofrequency device, which means it works on different points of the skin at the same time.
• It is the only home-use device that reaches the minimum temperature for clinical effectiveness, which is 38º-41º.

Although we recommend that you carefully read the device instructions, at SKINVITY we want to share our user experience and that of our customers, briefly summarizing how to optimize this fantastic device and offering tips for proper use:

Preparation:

The device should be used on clean, dry skin, over which a thin layer of TriPollar glycerin gel should be applied. This product is not a conductive gel, as it is not recommended to use conductive gels that could affect wave penetration and the device's temperature.

Areas of use:

TriPollar Stop X can be used on the face, except on the lips and eyes, although it can be used around them; on the neck, avoiding passing it over the trachea area; and on the upper part of the décolletage, that is, not directly on the chest.

We recommend starting with the first power level. For mature skin or skin with visible signs of sagging and loss of firmness, power level 2 may be suitable. Around the lips, eyes, neck, and décolleté, power level 1 is preferable.

Treatment:

We divide the face into 3 to 4 zones (left cheek, right cheek, forehead, and the area above the lip and chin). We should pass the device over each area for 3 to 5 minutes.

We place the device on the skin, applying light pressure to ensure complete contact between the electrodes and the skin. We move the device in a very slow, circular motion over a portion of the treatment area.

The device has two light sensors: a green one, which indicates that the device is heating up and will turn off when it reaches the appropriate temperature, and an orange one, which will illuminate when the skin area where the TriPollar Stop X device is being applied has reached the optimal temperature.

Continue with the same slow circular motion over the same area, until you have covered the entire treatment area, making sure that the orange indicator light stays on for as long as possible.

When you move the device to a new treatment area, the orange indicator light may turn off because the skin temperature is not yet warm.

If the orange indicator light and sound indicators do not appear within five minutes, or if you do not feel heat, try moving the device as slowly as possible without stopping. Slow, circular, and steady movements are more effective than fast ones. The slower the movement, the faster the treatment area will heat up.

If the orange indicator light and sound indicators come on immediately, or if you feel excessive heat, select a lower power level. If the orange indicator light and sound indicators do not appear after 3 to 5 minutes, select a higher power level. If they still do not come on, slow down your movements.

Frequency of use:

2 to 3 times a week for 6 to 8 weeks. From this point, the results would last up to 9 months or 1 year, and you should continue using it 2 to 4 times a month.

As you can see, although an initial effort is required, the effects last for a long time.

It is recommended to leave a day of rest between sessions before treating the same area again.

When will I start seeing results?

Radiofrequency is characterized by producing an immediate flash effect after the first session, so you'll notice results from the very first use. For medium- to long-term results, expect to see results starting from the 2nd to 3rd week.

In summary, TriPollar Stop X is the best facial radiofrequency device for home use available worldwide because it works all layers of the dermis homogeneously, resulting in a faster, safer, and more effective treatment. Furthermore, it reaches the minimum temperature to achieve a professional-level aesthetic result that is visible and long-lasting from the first sessions of use .

You can purchase the TriPollar Stop X device in our online store, and if you subscribe to our newsletter, you'll receive a €5 discount. Furthermore, at SKINVITY, we provide direct and personalized support, assisting you with initial use and answering all your questions.