TriPollar Aura: qué es, cómo funciona y por qué combinar LED y radiofrecuencia cambia los resultados

TriPollar Aura: What it is, how it works, and why combining LED and radiofrequency changes the results

by Belén
Article Contents
  1. What is TriPollar Aura?
  2. How it works: the science behind it
  3. The three technologies in synergy
  4. Clinical results endorsed by SGS
  5. TriPollar Aura vs other radiofrequency devices
  6. How to use TriPollar Aura step by step
  7. What other devices to combine it with
  8. Who is it for?
  9. Frequently asked questions
  10. Glossary of facial technology

The TriPollar Aura is the first at-home device on the market that combines 6-frequency Multi-Radiofrequency, long-pulse DMA technology, and red LED light (630 nm) in a single 10-12 minute session. The result is not summation, it's synergy.

In this guide, we explain exactly what each technology does, what clinical studies say, how to use it correctly, and why this combination makes a real difference to the skin.

What is TriPollar Aura?

Quick Answer

The TriPollar Aura is a home-use facial radiofrequency device developed in partnership between TriPollar and SKINVITY. It combines three technologies in a single session: 6-frequency Multi-RF, DMA current, and red LED light. It is endorsed by the independent laboratory SGS with clinical results in 28 days.

TriPollar Aura represents the result of the alliance between TriPollar, an Israeli company (Pollogen) with over 15 years of experience in professional aesthetic medical technology and its own patent in radiofrequency energy management, and SKINVITY, a leading distributor of at-home cosmetic technology in Europe.

What differentiates the Aura from conventional radiofrequency devices is not just the power, but the coverage: while most at-home devices work with 1 or 3 frequencies, the Aura operates with six simultaneous frequencies that uniformly cover all layers of the dermis. This allows for more complete stimulation of collagen and elastin, not just on the surface.

How it works: the science behind TriPollar Aura

Facial radiofrequency works by generating controlled heat in the deep layers of the skin. This heat, when applied precisely and at the right temperature, produces two clinically verified effects:

Immediate effect (flash): At 43 °C, existing collagen fibers contract. This produces a visible tightening effect from the first session; the skin feels firmer and more defined after the treatment.

Long-term effect (28–42 days): The heat activates neocollagenesis, i.e., the production of new collagen. With consistent use, the skin gains density, elasticity, and firmness from within.

What makes the TriPollar Aura unique is its thermal monitoring system: the device measures skin temperature 1,000 times per second and adjusts the energy in real-time to maintain 43 °C progressively and consistently, without uncomfortable heat spikes. It reaches this optimal temperature in just 18 seconds.

The three technologies that work in synergy

Technology What it does Key benefit
6-frequency Multi-RF
0.85 – 1.15 MHz 		Covers all layers of the dermis uniformly using 6 simultaneous frequencies Deep neocollagenesis stimulation. +28.59% density and +30.18% elasticity in 28 days
Long-Pulse DMA Dynamic muscle activation current that stimulates circulation and muscle tone Cellular oxygenation, improved facial contour (chin, jawline, cheekbones)
Red LED Light 630 nm Penetrates superficial layers to promote cell activation Improves luminosity and complements RF action

None of these three technologies are new in isolation. What differentiates the Aura is that all three act simultaneously in a single session, maximizing results without increasing treatment time.

About the gold-plated electrodes: Gold is the most efficient thermal conductor on the market. They allow for homogeneous energy delivery without spikes, ensuring 100% of the power reaches the cells uniformly.

Clinical results endorsed by SGS

The results of the TriPollar Aura are not just brand claims: they are endorsed by the independent SGS laboratory, in a study with 34 women aged between 26 and 53 with consistent use for 28–42 days.

Improvement of skin structure

+30.18%
Elasticity
+28.59%
Density
+14.81%
Firmness
+31.76%
Hydration

Visible wrinkle reduction in 28 days

−22.10%
Forehead wrinkles
−22.15%
Nasolabial fold
−21.89%
Crow's feet

In addition to the 28-day study, the laboratory demonstrated an immediate flash effect after a single 16-minute session: visible and measurable changes in firmness and tone from the first application.

TriPollar Aura × SKINVITY

The most advanced facial radiofrequency device on the at-home market. With gold-plated electrodes and clinical results in 28 days.

Discover the device

TriPollar Aura vs other radiofrequency devices

What truly differentiates it from the competition? This table summarizes the key technical characteristics compared to conventional at-home radiofrequency devices:

Feature TriPollar Aura Standard Home RF Clinical RF (in-office)
Number of frequencies 6 simultaneous frequencies 1 – 3 frequencies Variable
Additional technology DMA + Red LED RF only Device-dependent
Electrodes Gold-plated Surgical steel Professional
Thermal monitoring 1,000 readings/second No sensor / basic Yes (depending on equipment)
Time per zone 2 min/zone 4 min/zone Variable
Total session time 10 – 12 min 25 – 40 min 60+ min + travel
Independent clinical endorsement ✓ SGS, 34 women Variable / no endorsement Yes
Proprietary patent ✓ Pollogen/TriPollar ✗ Manufacturer-dependent

How to use TriPollar Aura step by step

The correct protocol is key to achieving the study results. Here is the detailed usage guide:

01

Prepare the skin

Clean and dry your face completely. Apply a thin layer of TriPollar Activation Gel to the treatment area. We recommend drinking water before the session: internal hydration optimizes thermal conductivity and improves results.

02

Select the power level (RF)

Always start at level 1. For the neck, lip contour, and eyes, use level 1 exclusively. Avoid the central neck area (thyroid area).

03

Radiofrequency (RF) treatment

Perform gentle, upward circular movements in 5x5 cm areas. The device will beep every 2 minutes to indicate a change of zone. Total duration: 10–12 min.

04

Combined RF + DMA treatment

Press the DMA button (blue light activates). Apply only to the chin, jawline, and cheekbones, with circular and upward movements. 2 minutes per zone.

05

Finish the treatment

Turn off the device and clean the head. Remove excess gel. Important: Do not apply cold water or decongestant products immediately after, the residual heat continues to act to maximize results.

Recommended frequency: 2–3 times a week for 6–8 weeks (intensive phase). Afterward, 1–2 weekly maintenance sessions are sufficient. Always allow at least 24 hours between sessions.

What other devices to combine it with

TriPollar Aura is fully compatible with other SKINVITY devices. Here are our recommended combinations:

Device How to combine it Objective
Silicone LED Mask Use it after the Aura treatment Enhance and prolong RF session results
TriPollar Envig Edge Combine them on alternate days Simultaneously address external texture (fine lines and spots) and deep structure

Who is the TriPollar Aura for?

The TriPollar Aura is designed for women who want real results, not promises. Specifically, it's for you if:

  • You're looking for the best in anti-aging technology, firmness, and wrinkle reduction
  • You have little time and need an effective treatment in 10–12 minutes
  • You want to see results from the first session (immediate tightening effect)
  • You wish to improve not only sagging but also facial texture, luminosity, and contour
  • You're looking for technology with independent clinical endorsement, not just marketing claims
  • You demand the best in every detail, from gold electrodes to precision thermal sensors

Frequently asked questions about the TriPollar Aura

When do you start seeing results with the TriPollar Aura?
The tightening effect is visible from the first session. Deeper structural results, improved density, elasticity, and wrinkle reduction are clinically documented from 28 days of consistent use (2–3 sessions per week).
How often should I use the TriPollar Aura?
During the intensive phase (first 6–8 weeks): 2–3 times a week, allowing at least 24 hours between sessions. Afterward, 1–2 weekly maintenance sessions are sufficient to sustain the results.
Is it safe to use on all areas of the face?
Yes, with one exception: the central neck area (thyroid area) should always be avoided. For delicate areas such as the eye contour, lips, and side of the neck, it is recommended to use power level 1 exclusively.
What is the flash effect of the TriPollar Aura?
It is the immediate tightening effect that occurs after a single session. The clinical-grade power generates an instant contraction of existing collagen fibers, producing visible firmness and vitality right after the treatment. Clinically documented by SGS.
Do I need to use a special gel with the TriPollar Aura?
Yes. The TriPollar Activation Gel (included in the kit) is essential to ensure treatment conductivity. It is not recommended to use other gels or substitutes, as they may alter energy delivery and results.
What is the difference between 1 frequency, 3 frequencies, and 6 frequencies in radiofrequency?
The number of frequencies determines the depth coverage of the dermis. With 6 simultaneous frequencies, as the TriPollar Aura does, the entire dermis is uniformly covered, maximizing collagen and elastin stimulation in all layers.
Can I combine the TriPollar Aura with other devices?
Yes. It is recommended to use it with the Silicone LED Mask (after the treatment) to enhance results, and with the Envig Edge on alternate days to address both deep structure and superficial texture.

Glossary of facial technology

Radiofrequency (RF)
Electromagnetic energy that generates controlled heat in the deep layers of the skin to stimulate collagen and elastin production.
Neocollagenesis
The process of creating new collagen. This is the mechanism by which radiofrequency improves skin density and firmness in the long term.
DMA
Dynamic muscle activation current that stimulates facial muscles, improves circulation, and contributes to cellular oxygenation and contour tone.
Red LED 630 nm
Wavelength that penetrates the superficial and middle layers of the skin to promote cellular activation and improve luminosity.
Gold-plated electrodes
Gold is the most efficient thermal conductor. It allows for uniform energy delivery, without heat spikes, for a safer and more effective treatment.
Flash Effect
Immediate contraction of collagen fibers when heat is applied at 43 °C. Produces a visible firming effect from the first session.

Start your TriPollar Aura protocol

Patented technology by Pollogen · Validated by SGS · Developed with SKINVITY

See the TriPollar Aura

Have questions? Write to us at hola@skinvity.com

Back to blog