Which TriPollar should you choose? Aura, Stop Vx2, Envig Edge and POSE Vx compared
by LauraShare
Aura, Stop Vx2, Envig Edge, POSE Vx. All four are TriPollar radiofrequency devices for home use and, at first glance, they look very similar. But they don't do the same thing.
The short answer: TriPollar Aura is the most complete facial treatment for firmness, density and wrinkles; TriPollar Stop Vx2 works on facial firmness with a simple routine; TriPollar Envig Edge renews the skin's surface (texture, pores and dark spots); and TriPollar POSE Vx is the TriPollar for the body. Choosing one or the other comes down to three questions: which area you want to treat, what your goal is and how much time you have.
In this article, we walk you through what sets each one apart, point by point.
The four TriPollar devices at a glance
| TriPollar Aura | TriPollar Stop Vx2 | TriPollar Envig Edge | TriPollar POSE Vx | |
|---|---|---|---|---|
| Area | Face | Face | Face | Body |
| Goal | Firmness, density and wrinkles | Firmness and muscle support | Texture, pores and dark spots | Firmness and body contour |
| Technology | Multi-radiofrequency with 6 frequencies, DMA and red LED light | 3 radiofrequencies and DMA | Fractional radiofrequency | Multi-radiofrequency and DMA |
| Time | 2 min per area | 4 min per area | 3 min per session | 15 to 20 min per area |
| Flash effect | Yes | Yes | No, progressive results | Yes |
Each TriPollar has its own efficacy test, so the result percentages cannot be compared between devices.
What determines which one is right for you
| Factor | Why it matters |
|---|---|
| Area | Aura, Stop Vx2 and Envig Edge are designed for the face. POSE Vx is the only one designed for the abdomen, arms, thighs and buttocks. |
| Goal | If you're looking for firmness and density, the key is a radiofrequency that heats the dermis (Aura, Stop Vx2). If what you want to improve is the surface (texture, pores, dark spots), the key is fractional radiofrequency (Envig Edge). |
| Time | Aura works in 2 minutes per area; Stop Vx2 in about 4 minutes per area. Envig Edge, in 3 minutes per session. |
| Flash effect | Aura, Stop Vx2 and POSE Vx have a flash effect, visible from the very first session. Envig Edge doesn't: its results are progressive. |
| Sun exposure | Aura and Stop Vx2 are not photosensitising. With Envig Edge, you need to avoid the sun after the treatment and use sun protection the following day. |
What the evidence says about radiofrequency
Non-ablative radiofrequency heats the dermis in a controlled way. That heat causes an immediate contraction of the collagen fibres and, in the medium term, stimulates the production of new collagen, which translates into firmer skin (Elsaie et al., 2010). This is the basis of the flash effect of Aura, Stop Vx2 and POSE Vx, and of their results from 28 days onwards.
Fractional radiofrequency works differently: it distributes the energy into micro-zones on the skin's surface, leaving intact tissue between them. This type of stimulus has been associated with the formation of new collagen and elastin (Hantash et al., 2009) and with an improvement in texture and fine wrinkles (Hruza et al., 2009). That's why its results are not immediate, but progressive.
TriPollar Aura: firmness, density and wrinkles, in half the time
TriPollar Aura is for you if you're looking for the most complete facial treatment. It combines three technologies working in synergy:
- Multi-radiofrequency with 6 frequencies, which acts on every layer of the dermis.
- Gold-plated electrodes, for their conductivity.
- Red LED light at 630 nm.
It also includes DMA (Dynamic Muscle Activation) as a complement. It reaches 43 °C in 18 seconds and monitors the temperature 1,000 times per second. The treatment takes 2 minutes per area: when the device beeps, it's time to move on to the next area. Compared with Stop Vx2, which needs about 4 minutes per area, Aura works in half the time.
Efficacy test results (SGS, 34 women aged 26 to 53, results at 28 days):
- +14.81% firmness
- +28.59% density
- +30.18% elasticity
- 22.10% improvement in forehead wrinkles
- +31.76% hydration
Explore TriPollar Aura →
TriPollar Stop Vx2: facial firmness with muscle support
TriPollar Stop Vx2 is for you if you're looking for firmness and density with a simple routine. It works with 3 radiofrequencies and Dynamic Muscle Activation. The treatment takes about 4 minutes per area, and the full face is done in 15 to 20 minutes. It has a flash effect and is not photosensitising.
Efficacy test results (SGS, 33 participants, results at 28 days):
- +31.17% firmness
- 30.97% improvement in the length of crow's feet
- +24.22% skin radiance
Explore TriPollar Stop Vx2 →
TriPollar Envig Edge: texture, pores and dark spots
TriPollar Envig Edge is for you if you want to renew the surface of your skin. It works with fractional radiofrequency, it's cordless and it doesn't need gel. A session takes 3 minutes.
Unlike Aura and Stop Vx2, it has no flash effect: its results are progressive. As it works on the most superficial layers, after the treatment you need to avoid the sun and use sun protection the following day.
Efficacy test results (independent test, 31 people aged 21 to 44):
- 30% improvement in wrinkles in 8 weeks
- 38% fewer epidermal dark spots in 6 weeks
- 29% smaller pore size
Explore TriPollar Envig Edge →
TriPollar POSE Vx: the TriPollar for the body
TriPollar POSE Vx is for you if you're looking for firmness on the abdomen, arms, thighs or buttocks. It combines multi-radiofrequency at 1 MHz and Dynamic Muscle Activation, and acts on the dermis, hypodermis and muscle. The treatment takes 15 to 20 minutes per area.
Efficacy test results (27 women aged 22 to 43, results at 28 days):
- 81% noticed an improvement in skin firmness and elasticity
- 81% noticed an improvement in body shaping and slimming
- 100% would keep using it and would recommend it
Explore TriPollar POSE Vx →
How to fit them into your routine
Radiofrequency devices are used every other day at most. They all complement your usual skincare routine as well as cosmetic and medical-aesthetic treatments.
On the face, the recommended order is radiofrequency first, then LED light and finally your skincare:
| Step | Device | What it adds to the routine |
|---|---|---|
| 1 | TriPollar Aura, Stop Vx2 or Envig Edge | Radiofrequency for firmness or for the skin's surface, depending on the model |
| 2 | Silicone LED Mask | LED photobiomodulation at cellular level |
| 3 | Your skincare products | Complete the routine |
On the body, POSE Vx fits into a combined routine following this order:
| Step | Device | What it adds to the routine |
|---|---|---|
| 1 | Glo 910 PRO | Subdermal massage and LED phototherapy for firmness, texture and the appearance of the skin |
| 2 | PressTech | Drainage of fluids and toxins and stimulation of circulation |
| 3 | TriPollar POSE Vx | Body radiofrequency to work on firmness and improve the appearance of the skin |
| 4 | Infrared LED Mat | LED phototherapy that acts at cellular level |
What to ask yourself before choosing your TriPollar
Do I want to treat my face or my body? For the body, POSE Vx. For the face, Aura, Stop Vx2 or Envig Edge.
Is my priority firmness or the surface of my skin? For firmness, density and wrinkles, Aura or Stop Vx2. For texture, pores and dark spots, Envig Edge.
How much time do I have? Aura works in 2 minutes per area and Envig Edge in 3 minutes per session. Stop Vx2 needs about 4 minutes per area.
Do I want to notice an effect from the first session? Aura, Stop Vx2 and POSE Vx have a flash effect. Envig Edge gives progressive results.
Can I avoid the sun after the treatment? If not, Envig Edge isn't the best option for now. Aura and Stop Vx2 are not photosensitising.
When to see your doctor
TriPollar devices are cosmetic treatments for home use. Before you start, check the contraindications in your device's manual and, if you have any doubts about your own case (for example, if you're pregnant, have a health condition or are following a medical treatment), talk to your doctor.
This content is for informational purposes only and does not replace a medical assessment.
Frequently asked questions
What is the difference between TriPollar Aura and Stop Vx2? Both work on facial firmness with radiofrequency and Dynamic Muscle Activation, and both have a flash effect. Aura uses multi-radiofrequency with 6 frequencies, gold-plated electrodes and red LED light, and works in 2 minutes per area. Stop Vx2 uses 3 radiofrequencies and needs about 4 minutes per area.
Which TriPollar is best for dark spots and pores? TriPollar Envig Edge. Its fractional radiofrequency works on the surface of the skin: texture, pores and dark spots.
Which TriPollar is used on the body? TriPollar POSE Vx. It's the only one of the four designed for the abdomen, arms, thighs and buttocks.
Does Envig Edge have a flash effect? No. Unlike Aura, Stop Vx2 and POSE Vx, its results are progressive.
Can I go in the sun after using a TriPollar? With Aura and Stop Vx2, yes: they are not photosensitising. With Envig Edge, no: you need to avoid the sun after the treatment and use sun protection the following day.
How often should I use a TriPollar? Radiofrequency devices are used every other day at most. Results start to show at 28 days.
Quick glossary
Radiofrequency: energy that heats the dermis in a controlled way to stimulate collagen production. Multi-radiofrequency: radiofrequency that works with several frequencies to act on different layers of the dermis. Fractional radiofrequency: radiofrequency that distributes the energy into micro-zones on the skin's surface; it works on texture, pores and dark spots. DMA (Dynamic Muscle Activation): TriPollar technology that complements radiofrequency by acting on the muscle. Flash effect: a visible improvement from the first session, thanks to the contraction of collagen fibres caused by heat. Efficacy test: an assessment of a device's results in a group of participants over a specific period.
In summary
The four TriPollar devices share the same core technology, radiofrequency, but each one responds to a different need. TriPollar Aura is the most complete facial treatment, for firmness, density and wrinkles in 2 minutes per area. TriPollar Stop Vx2 works on facial firmness with a simple routine. TriPollar Envig Edge renews the skin's surface with fractional radiofrequency. And TriPollar POSE Vx brings firmness to the body. Their names are almost the same. What they do is not. What matters is choosing the one that matches what you're looking for.
The SKINVITY Team
Scientific references
The references in this list correspond to the general scientific evidence on radiofrequency. The results for each device come from its own efficacy test: TriPollar Aura (SGS, 34 women aged 26 to 53, 28 days), TriPollar Stop Vx2 (SGS, 33 participants, 28 days), TriPollar Envig Edge (independent test, 31 people aged 21 to 44) and TriPollar POSE Vx (27 women aged 22 to 43, 28 days).
- Elsaie ML, Choudhary S, Leiva A, Nouri K. Nonablative radiofrequency for skin rejuvenation. Dermatol Surg. 2010;36(5):577-89.
- Hantash BM, Ubeid AA, Chang H, Kafi R, Renton B. Bipolar fractional radiofrequency treatment induces neoelastogenesis and neocollagenesis. Lasers Surg Med. 2009;41(1):1-9.
- Hruza G, Taub AF, Collier SL, Mulholland SR. Skin rejuvenation and wrinkle reduction using a fractional radiofrequency system. J Drugs Dermatol. 2009;8(3):259-65.